Scientific & Industrial General Purpose Solenoid Valves

Description

Valcor Scientific presents our family of general purpose solenoid valves. This broad line of 2, 3, and 4-way solenoid valves include direct acting, piloted diaphragm, zero differential piloted diaphragm, balanced poppet, and piloted piston type configurations in plastic, brass, and stainless steel constructions.

Application

Complemented by a wide selection of seal materials, electrical voltages, and NEMA rated coil housings, these valves are suitable for a diverse range of industrial applications including general on-off control, gas and liquid distribution systems, process control systems, calibration and test stands, pilot plant control loops, and an unlimited array of OEM applications.

Design Features and Benefits

  • Stainless steel or brass body construction.
  • Standard seal materials of Buna, EPDM, EPR, PTFE, and Rulon.
  • Pressure ranges from vacuum to over 1000 PSI.
  • Cv’s to 38, orifice sizes to 1½”.
  • Ports from 1/8″ to 2″ inch NPT.
  • Valves available in two-way, three-way, and four-way configurations.
  • Customized solutions are our specialty.

2-Way Valves

SV11/12

Direct Acting

  • 1/4″ NPT port size
  • Cv values of .019 to .095
  • Pressures up to 1,000 PSI
  • Straight through flow path
  • Normally Open/Normally Closed

SV330/430

Direct Acting

  • 1/8″ through 3/8″ NPT port sizes
  • Cv values of .05 to 1.70
  • Pressures up to 1,050 PSI
  • Brass and Stainless Steel Bodies
  • Normally Open/Normally Closed

SV321/421

Piloted Diaphragm

  • 3/8″ through 2″ NPT port sizes
  • Cv values of 3.3 to 29
  • Pressures up to 250 PSI
  • Brass and Stainless Steel Bodies
  • Normally Open/Normally Closed

SV320/420

Piloted Diaphragm

  • 3/8″ through 1½” NPT port sizes
  • Cv values of 3.3 to 18
  • Pressures up to 200 PSI
  • Zero differential
  • Normally Open/Normally Closed

SV327/427

Piloted Diaphragm

  • 1″ through 2″ NPT port sizes
  • Cv values of 13 to 28
  • Pressure up to 125 PSI
  • Zero differential
  • Normally Open/Normally Closed

SV340/440

Piloted Piston

  • 1/4″ through 1¼” NPT port sizes
  • Cv Values of .8 to 18.8
  • Pressures up to 300 PSI
  • Brass and Stainless Steel Bodies
  • Normally Open/Normally Closed

SV350/450

Piloted Piston

  • 1/4″ through 1/2″ NPT port sizes
  • Cv values of .8 to 1.5
  • Pressures up to 2,200 PSI
  • Stainless Steel Body
  • Normally Open/Normally Closed

3-Way Valves

SV323/424

Piloted Diaphragm

  • 3/8″ to 1/2″ port sizes
  • Cv value of 3.3 to 4.4
  • Pressures up to 150 PSI
  • Normally open/Normally closed
  • Cylinder Actuation Applications

SV733/734/736

Direct Acting

  • 1/8″ through 1/4″ NPT port sizes
  • Cv value of .05 to .80
  • Pressures up to 200 PSI
  • Normally open/Normally closed
  • Universal

SV833/834/836

Direct Acting

  • 1/8″ through 1/4″ NPT port sizes
  • Cv value of .09 to .38
  • Pressures up to 200 PSI
  • Normally open/Normally closed
  • Universal

Additional Information

Valcor’s General Purpose Solenoid Valves consist of a broad selection of 2, 3, and 4-way solenoid valves. They can be used for a wide array of industrial applications, including general on-off control, calibration and test stands, pilot plant control loops, gas and liquid distribution systems, process control systems, and various OEM applications. Direct acting, piloted diaphragm, zero differential piloted diaphragm, balanced poppet, and piloted piston type configurations are all available. Construction options consist of plastic, brass, and stainless steel.

These valves have pressure ranges from vacuum to over 1000 PSI, and ports from 1/8” to 2” NPT. CV’s up to 38 and orifice sizes go up to 1 ½”. Standard seal materials available are: Buna, FKM, EPR, PTFE, and Rulon.

See below for more detailed information on Valcor’s General Purpose Solenoid Valves:

2-Way Valves

SV11/12

The SV11 & SV12 are 2-way, normally closed and normally open valves with floating seal construction. The straight-thru flow path permits high flow of non-corrosive fluids and gases with no minimum pressure required for operation. They have a high pressure rating, up to 1000 psi.

For more information on the SV11/12 series, click here for the data sheet.

SV330/430

The SV33 & SV43 are 2-way, normally closed and normally open, direct acting solenoid valves. Designed for high cycles and long life, these valves are mountable in any position and can handle a wide range of fluids, with an operating pressure range of 0 psi to 1050 psi. Port sizes range from 1/8” to 3/8” NPT and orifice sizes from 3/64” to 3/8”.

For more information on the SV330/430 series, click here for the data sheet.

SV320

The SV320 and SV420 series are 2-way zero differential, normally open and normally closed, piloted diaphragm solenoid valves. With a pressure rating up to 200 psi, these valves are designed to operate at zero differential pressure. A wide selection of construction materials allow for use on a variety of fluids.

For more information on the SV320 series, click here for the data sheet.

SV321/421

The SV321 and SV421 series are 2-way normally closed and normally open, piloted diaphragm operated solenoid valves. These valves range from 3/8” to 2” port sizes and orifices sizes from 5/8” to 1 ½”. Pressure rating is up to 250 psi. These sturdy valves are designed to handle a wide range of gases and fluids.

For more information on the SV321/421 series, click here for the data sheet.

SV327/427

The SV327 and SV427 series valves are 2-way, zero differential, normally closed and normally open, piloted diaphragm operated solenoid valves. Port sizes range from 1” to 2” and orifice sizes range from 1” to 1 ¼”. These high flow valves have pressures range from 0 to 125 psi.

For more information on the SV327/427 series, click here for the data sheet.

SV340/440

The SV340 & SV440 series are 2-way normally closed and normally open, piloted piston operated solenoid valves. With pressure rating of up to 300 psi, these high flow valves are designed to handle a wide range of gases and fluids. Port sizes range from 3/8” to 1 ¼”, and orifice sizes range from 3/8” to 1 1/8”.

For more information on the SV340/440 series, click here for the data sheet.

3-Way Valves

SV323/424

The SV323 & SV424 series are 3-way, normally closed and normally open, piloted diaphragm operated solenoid valves. Port sizes are available in 3/8” and ½” and have a pressure rating of 150 psi. All internal sliding parts have been eliminated, which makes these valves highly resistant to dust, water deposits and other foreign material present in the flowing media.

For more information on the SV323/424 series, click here for the data sheet.

SV733/734/736

The SV733, SV734 and SV736 are 3-way, normally closed, normally open and universal, direct acting solenoid valves. They range from 1/8” to ¼” port sizes and have orifice sizes from 3/64” to ¼”. Operating pressure range is 0 psi to 200 psi.

For more information on the SV733/734/736, click here for the data sheet.

SV833/834/836

The SV833, SV834 and SV836 are 3-way, normally closed, normally open and universal, direct acting solenoid valves. The port sizes are 1/8” to 1/4”. These valves are panel mountable, and the valve design allows coil replacement without disturbing fluid connections.

For more information on the SV833/834/836 series, click here for the data sheet.