Valcor Engineering Corporation

Scientific & Industrial Diaphragm Isolated and PTFE Solenoid Valves and Components

Description

Utilizing elastomeric or PTFE flexible diaphragms and bellows, the Valcor Scientific family of Diaphragm Isolated Solenoid Valves do not allow contact of the fluid or gas being handled with the valves internal metal operating parts. Paired with polypropylene or PTFE bodies, these highly inert ‘dry solenoid’ valves offer the utmost in dependability where ordinary general-purpose ‘wetted’ valves typically fail.

Application

The chemically inert design inherent in our diaphragm isolated solenoid valves make them an ideal choice where no metal contact of the media, or areas of entrapment, can be tolerated. Well suited for high purity, corrosive, viscous and abrasive fluids, our valves can be found on medical sterilizers, water treatment systems, food processing equipment, and chemical and process analyzers.

Design Features and Benefits

  • Available in two-way normally closed & normally open
  • Port connections of 1/4″ and 3/8″ NPT
  • Orifice sizes of 1/16″ through 3/8″, Cv ratings of .10 to 1.9
  • Pressure ratings of vacuum to 130 PSI
  • Wide range of inert wetted elastomers and plastics to choose from
  • Direct acting, bubble-tight constructions available in AC and DC voltages

2-Way Valves

SV51/52

Direct Acting

  • 1/4″ and 3/8″ NPT Sizes
  • 1/16″ to 3/8″ Orifice Sizes
  • Pressures up to 125 psig
  • PTFE and Polypropylene Bodies
  • Normally Open / Normally Closed